Optimal Design and Test of Longitudinal and Lateral Stability of Large Monopoly Wide Potato Cultivator
Abstract
For the large monopoly wide potato cultivator due to the width of the larger, equipment structure was huge and the potato biologica morphological characteristics of the longitudinal and horizontal stability of the potato poor, serious deflection, pressure seedling injury and other problems,the optimized design and test of the large monopoly wide potato cultivator were carried out. Through kinematic analysis of the potato cultivator, the main factors affecting the longitudinal and lateral stability of the tiller was determined and the design of its components was optimized, the EDEM discrete element simulation software was used to conduct a secondary orthogonal rotation simulation, test with the horizontal distance from the mulching share to the hinge point of the parallel four-bar and the frame, the lateral width of the parallel four-bar and the operating speed as the test factors, and the monopoly straightness and the monopoly height stability coefficient as the evaluation indexes. Using Design-Expert 11.0 software to optimize and analyze the results of the simulation test. When the horizontal distance from the mulching share to the hinge point of the parallel four-bar and the frame was 702.7mm,the lateral width of the parallel four-bar was 255.4mm and the operating speed was 1.29m/s, the monopoly straightness of the cultivator was 2.39cm and the stability coefficient of the monopoly height was 94.12%.The optimized data were verified in field tests, results showed that the straightness of monopoly direction was 2.4cm, the pass rate of cultivation was 95.7%, the injury rate was 1.5%, the stability coefficient of monopoly height was 94.2%, and the height of cultivation was 7.8cm. The optimized large monopoly wide potato cultivator was more reasonable, with good working effect,which had better longitudinal stability and lateral stability than the pre-optimized large monopoly wide potato cultivator.
Keywords: large monopoly wide potato cultivator, lateral stability, longitudinal stability, discrete element method
Download Full Text:
PDFReferences
LI Zihui, WEN Xinvu, LC Jinqing,et al. Analysis and prospect of research progress on key technologies and equipments of mechanization of potato planting [J ]. Transactions of the Chinese Society for Agricultural Machinery, 2019, 50 (3) : 1 - 16.
WANG Jiaqi. Parameters optimization and experiment of cultivators in joint operation of deep loose ridges in brown soil area of western Liaoning Province [D], Shenyang: Shenyang Agricultural University,2018.
LI Jinqing, WANG Yingbo, DU I Han,et al. Design of key components of driving-type potato cultivator and its soil-broken effect experiment [ J ]. Transactions of the Chinese Society for Agricultural Machinery, 2017, 48 (10); 49 -58.
LD Jinqing, LIU Qihui,LI Zihui,et al. Design and experiment of soil cultivating device of plowshare potato field cultivator [J]. Transactions of the Chinese Society for Agricultural Machinery, 2021 ,52(7) :71 -82. (in Chinese)
YI Shujuan, SUN Zhijiang, LI Yifei, et al. Design and test of disc potato cultivator at early inter-tillage [J] . Transactions of the Chinese Society for Agricultural Machinery,2020,51 (5) :98 - 108. (in Chinese)
L0 Jinqing, LIU Zhifeng,WANG Pengrong, et al. Design and test of multi-function potato cultivator with drive type soil crushing and weeding [J ]. Transactions of the CSAE,2019 ,35 ( 10) ;1 —8.
LD Jinqing, SHANG Qinqin, YANG Ying, et al. Design and experiment analysis of 1ZL5 type cultivator [J]. Journal of Agricultural Mechanization Research ,2017 ,39( 2 ) : 79 - 83.
BAO Wenyu, LIN Jing, HUO Chunming,et al. The stability of crosswise movement of type 2BG-2 no-till planter [J] . Journal of Shenyang Agricultural University ,2009 ,40(3 ) :370 -372. (in Chinese)
IIU Jun. Theory and experimental research of sowing depth control for precision seeder unit[D]. Changchun: Jilin University, 2012.
К A LI М В ETO V В Y, TUKHTAKUZIYEV A, USMANOV A S, et al. Study of the process of movement stability of mounted cultivator working bodies on combined inter-tillage of vegetable crops [ J ]. EurAsian Journal of BioSciences Eurasia, 2020, 14;
LIN Jing,QIAN Wei, LI Baofa,et al. Simulation and validation of seeding depth mathematical model of 2BG -2 type corn ridge planting no-till planter [ J ]. Transactions of the CSAE ,2015 ,31 (9) ;19 -24.
JOHANNES Q. Cone crusher modelling and simulation using DEM[J]. Minerals Engineering, 2016, 85 :92 - 105.
ARCHARD J F. Contact and rubbing of flat surfaces[J]. Applied Physics, 1953, 24(8); 981 -988.
ZHAO Shuhong, GAO Lianlong, YUAN Yiwen, et al. Maize straw motion law in subsoiling operation using discrete element method [J] . Transactions of the CSAE, 2021 , 37(20) ; 53 -62.
ZHENG Kan, HE Jin, LI Hongwen, et al. Research on polyline soil-breaking blade subsoiler based on subsoiling soil model using discrete element method [J]. Transactions of the Chinese Society for Agricultural Machinery, 2016 ,47 ( 9 ) : 62 -72.
L.0 Jinqing, LIU Qihui, YANG Deqiu, et al. Design and test of key components of ploughshare potato field cultivator in sandy loam [J]. Transactions of the Chinese Society for Agricultural Machinery, 2021, 52(8) : 27 -39. (in Chinese)
SHI Yuliang, CHEN Xinyu, CHEN Mingdong, et al. Design and experiment on ploughshare furrowing ridging device of sweet potato ridging shaping machine [J]. Transactions of the Chinese Society for Agricultural Machinery, 2022,53( 10) ;16 -25.
Refbacks
- There are currently no refbacks.
