Design and Experiment of Potato Breeding Planter with Rotary Table Grid

YANG Ranbing, WANG Jie, SHANG Shuqi, ZHA Xiantao, PAN Zhiguo, WANG Zhichao

Abstract

Aiming at the problems of low efficiency in the sowing operation of potato breeding experiments in China, and poor plant spacing uniformity, the sowing accuracy of breeding experiments cannot meet the breeding requirements. A potato breeding experiment planter was designed. The type seed metering device enabled the seed potatoes to be seeded from the same position, thereby improving the uniformity of plant spacing.Taking the qualified rate of plant spacing and the coefficient of variation of plant spacing uniformity as evaluation indicators, the movement state of seed potatoes after seeding, seed guiding and landing was analyzed. The angle between the seed height, the initial position of the seed drop and the forward speed direction of the machine was obtained;and based on the rotation regression orthogonal test, the regression model between the evaluation index and the influencing factors was established, and the factor range when the test index was optimal was obtained. The field verification test showed that when the forward speed of the tractor was 0.14m/s, the seeding height of the grid was 0.64m, and the angle between the initial position of the seed drop and the direction of the forward speed of the machine was 18.24°, the qualified rate of plant spacing was 87.1%, the coefficient of variation of plant spacing uniformity was 13.4%, and all performance indicators exceeded the design requirements of national standards, which improved the efficiency and quality of potato breeding experiments, and improved the precision and accuracy of potato breeding experiments.


Keywords: breeding, potato, seeder, grid

 

Download Full Text:

PDF


References


LUO Qiyou,GAO Mingjie,ZHANG Shuo,et al. Comparative analysis on potato industry between China and other countries[ J ]. Chinese Journal of Agricultural Resources and Regional Planning,2021 ,42(7) :1 -8. (in Chinese)

LUO Qiyou, LUN Runqi, GAO Mingjie, et al. Strategy path of high-quality development of potato industry in China during the 2021 to 2025 [ J ]. Chinese Journal of Agricultural Resources and Regional Planning, 2022 ,43 ( 3 ) : 37 -45. (in Chinese)

LI Zihui,WEN Xinvu, LtJ Jinqing, et al. Analysis and prospect of research progress on key technologies and equipments of mechanization of potato planting[ J ]. Transactions of the Chinese Society for Agricultural Machinery, 2019,50(3) :1 - 16. (in Chinese)

SUN Wei, LIU Xiaolong,ZHANG Hua,et al. Design of potato casingsoil planter in all-in-one machine combined with fertilizing, sowing, ridging, complete film mulching and planting line coveringf J]. Transactions of the CSAE ,2017 ,33 (20) ; 132 - 141.

ANNOP D,ASEEM V, ARSHDEEP S, et al. Performance of tractor mounted vertical belt paired row potato planter [ J ]. Agricultural Research Journal,2015 ,52( 1 ) ;43 -56.

DUAN Hongbing,CHEN Zhipeng,SONG Botao,et al. Design and experiment of triangular chain half cup spoon-shaped potato precision planter in hilly mountainous areas [J]. Transactions of the Chinese Society for Agricultural Machinery, 2019,50( 1 ) ; 96 - 104. ( in Chinese)

YANG Hongguang, LIU Zhishen, N1 Zhiwei,et al. Design and test of 2CM -4 type potato planter [ J ]. Journal of Qingdao Agricultural University( Natural Science) ,2017,34(2) : 137 - 140,156. (in Chinese)

L(J Jinqing, YI Shujuan,TAO Guixiang, et al. Design and experiment of precision air-suction type planter for potato [J ]. Transactions of the CSAE,2018 ,34( 10) ; 16 - 24. (in Chinese)

WANG Yecheng,GAO Yunpeng,TAI W enshuo,et al. Design and test of pickup finger potato precision seed metering devic. Transactions of the Chinese Society for Agricultural Machinery ,2021 ,52( 1 1 ) :49 -58. (in Chinese)

MARIO H M L A,CLAUDIO С F F,MAIARA 0 F,et al. Accounting for spatial trends to increase the selection efficiency in potato breeding[J]. Crop Science,2020,60(5 ) ;87 -96.

YIN Xiangjia. Research on application of potato molecular breeding technology. J]. China Seed Industry, 2021 (9) :6 -9. (in Chinese)

SHARMA N, SANDERS W,GRAVELAND R,et al. A public-private partnership to speed up potato breeding J ]. Open Agriculture,2020,5(1 ) :243 -257.

XU Jianfei,JIN Liping. Advances and perspectives in research of potato genetics and breeding [ J ]. Scientia Agriculture Sinica, 2017,50(6) :990 - 1015. (in Chinese)

SCHNEIDER C. Project aims to develop new potato varieties[ J]. Southwest Farm Press,2020 ,37 ( 1 ) : 175 - 184.

YIN Lili, XING Baolong, LIU Fei, et al. Research progress of breeding methods and status of potato [ J ]. Journal of Agriculture,2015 ,5( 12) ;9 — 13. ( in Chinese)

BUITENWERFETH H. Assessment of the behaviour of potatoes in a cup-belt planter [ J ]. Biosystems Engineering, 2006, 95 ( 1 ) :35 -41.

GUO Dong,ZHENG Yuanyuan, WANG Zhengzeng,et al. Design and test of 2CM —SF potato planter[ J ]. Journal of Agricultural Mechanization Research ,2021 ,43(4) : 103 - 106,1 1 1. (in Chinese)

ZHANG Junlian,WANG Di. Changes of potato breeding methods in my country and research progress of transgenic breeding [J]. Chinese Potatoes ,2005 ( 3 ) ; 163 - 167. (in Chinese)


Refbacks

  • There are currently no refbacks.